The extenders help to expand the wifi signal. You can connect more than one extender with your router directly. But if you use more than two, that can impact your network speed. So if you want to connect numerous extenders with wifi, you have to take care of multiple things which we are going to explain below. It will help you to set up more extenders at the same time.
Move Your Router To A Better Place
If you want to connect many extenders then firstly, your router should be in a better place in your home. Because if it is not in the right location your extender can’t get proper signals. For example, if you put your router in the cupboard or back side of your tv, your router is helpless to perform well. So the place is the major reason where extenders get better signals and do work properly.
Position The Extenders Opposite To Each Other
Don’t put access points together. To ensure that the Wi-Fi extender is still in the router’s strong signal range, place it midway between the router and the dead spot.
You have to attentively put extenders at home. Not only put the router far away from your extender but also don’t put the extenders close. It may impact the efficiency of your router. Many times people use multiple extenders and face weak signal problems. So avoid using multiple extenders. That’s Why you don’t need to use many extenders at your home to get better signals.
Note: Brostrend 1200 ac is the best extender. You can set the extender yourself with the help of brostrend AC1200 setup.
Use The Different Network Names
If you are using multiple extenders at your home then give the different names of every network. You have to give different names not only for routers but also extenders. Because if you put the same name on your network, it can create a mess and not get signals from each other. So, it is very important to give a unique name to everyone.
For example, if your extender 1 has a username “my wifi” and the password is my password and the second extender has also the same name then maybe an extender can confuse to accept the command of the router. When you set your extender name then put it differently for everyone. ‘For Instance-extender 1 name can be wifi and SSID name is my wifi upstairs. In the case of another extender, you can put extender 2 and save a different name for extender and SSID.
In the case of extenders try to give clear and logical names. So that people can connect their devices with the extender without facing any difficulty. It can be the major reason for slow internet connection at your premises. If you don’t have knowledge of how to set extenders at home and give the perfect name to each one then you follow brostrend extender setup steps and set the right names for your extenders.
Set The Channels Manually
If you are using 2.4 GHz band extenders, or multiple extenders, you need to pay special attention to channels. 2.4GHz brand has only three overlapping channels 1, 6, and 11. Getting good performance from your router and extender then set the channels attentively. If you use one router and two extenders, make sure to set the channels very carefully.
In case you live in an apartment or your neighbor also uses an extender, it may be interference in your network. Because when they use it at the same time, network speed goes too slow and disturbs your work. For extenders using the 5Ghz band, it is best but if you still get a network problem then it may be your neighbor’s interference.
Conclusion
Many extenders are not a problem if they locate the right place with different names and different passwords. So if you also use multiple extenders at your home and face any kind of issues about the network. You can go to re.brostrend.com and follow these steps while the extender set up. So if you want to connect multiple extenders in your house then follow the instructions carefully.
