Did you by any chance drop your disposable vaporiser in water? We can feel it with you because it would most probably make your device unproductive and bothersome. However, there is a solution: water extraction from a disposable vaporiser is your guide to saving your device.
What is the fate of a disposable vape when it gets wet?
Disposable vapes like the VNSN Spark 12000 and VNSN Quake 14000 puffs are gaining popularity as a replacement for smoking. These devices allow you to puff anywhere and are considered healthy substitutes. However, water can cause their malfunction just as it does with other electrical appliances.
Accessories for Water Extraction from Disposable Vapes
A few tools are needed for the wet disposable vape to be fixed, and they include the following supplies:
- Cleaning cloth or paper towels
- A small plate or container
- Raw rice
- An optional hair dryer
How-To Guide: How to Eliminate Water from a Disposable Vape
Before commencing with the process, it is necessary to recognize that even though the disposable vaporizer can get drenched, an attempt to repair it might not yield success and might even cause more harm: permanent loss. If too much moisture has penetrated, we recommend disposing of the device and buying a new one.
Stage 1: Dismantle the Cartridge and Battery
You first need to take out the cartridge from the vape and then remove its battery. Either your fingers or a tiny screwdriver can be used to remove the battery cover or access panel. By now, you should be able to see the device’s batteries. Gently take out the batteries from their spaces so as not to break the connections or any other parts of the device.
Step 2:The vaporiser should be cleaned from the outside and left dry.
The vape should be rubbed and cleaned with a fresh towel or wipes, and all areas where water can enter should be reached.
Step 3: Remove Any Water That Can Be Seen from the Inside of the Vape
Next, a paper towel or soft material should be used to remove all visible water from within the device. The device’s internal circuitry should never be washed or scraped, as this can lead to damage.
Step 4: Air Drying
After the appliance has been dried as much as possible, it should be in a dry area for at least 24 hours to permit the evaporation of any remaining water. It is advisable not to use the appliance until one is sure it is not scorched.
Step 5: Reassemble the Vape and Test It
Wrapping up the disassembled disposable vape restoration is the last but not least step after completely drying it out. First, securely attach the cartridge without damaging the device before screwing it onto the battery section, then reinstall it. After reassembly, five quick power button presses will turn the disposable vape on again.
After being put together, the vaporiser should be checked to ensure it is working fine before use. If it still doesn’t function properly, it might be the right time to get a new e-cigarette.
Conclusion
Vaping experience doesn’t matter; accidents will still happen. Still, it is a good thing to get water damage control as a skill. Getting rid of moisture in a disposable vaporizer is just another opportunity to show your problem-solving talent.
So, bring along your rice, cotton swabs, and vacuum cleaner, and get down to work. Who knows, you might even discover a new hobby in fixing your own vapes.
Visit our online store for the most popular vapes, Vnsn quake 14000 puffs, and Vnsn spark 12000 puffs.
