Looking for GE Universal Remote Control Codes? Yes, you have reached the right platform to get remote GE codes from here. These days we have many things in our house. Accordingly, we have TV, CD player, set-top box and more. To work with any device we must use remote control. But there are many remote controls that we sometimes lose. Programming the GE Universal Remote with different codes requires only a few simple steps.
General Electric Remote Control Codes
ABEX 185
ACME 0008, 0050
ADA 20
ADC 0002, 0006
Admiral 0020, 0226, 0001
Appearance 0176, 0922
Adventure 174
Iko 58
AIWA 0195, 0196, 0227, 0269
Aileron 51
How to Program the GE Universal Remote Once everything is done, turn on the device you want to use the GE Universal Remote to control.
Then press and hold the setup button (6) until the red light turns on.
Now press the button of the device you want to use. Like DVD, set top box or something else.
Now you need to enter the device password from the list above. If you see more than one code, start with the code above.
When the code is entered correctly, the red light will turn off.
Now target the device and press the Power button. If the codes work on the GE Universal Remote, the device will turn off. If not, try another GE remote code list.
How to Use Code Search to Program a GE Universal Remote Control
If you still cannot find the key code for this device, you can set the universal remote control to search for the appropriate key code.
First, turn on the device.
Press and hold the “Setup” button,
Enter the code (three digits).
Hold the power button on the remote and then press the channel to turn off the device, in this case your TV.
Although the above method may take more time, finding your key code is very important.
After completing the above steps, your remote should be able to perform all its functions.
Before programming the GE Universal Remote Control, turn on the device you want to control with the GE Universal Remote Control after doing anything else.
Then press and hold the setting button until the red light turns on.
Now press the button of the device you want to use. Like DVD, set top box or something else.
If you see more than one code, if you see more than one code, enter the first code from the top.
When the code is entered correctly, the red light will turn off.
Now target the device and press the Power button. If the codes work on the GE Universal Remote, the device will turn off. If not, try another code from the GE remote control code list.
What if the normal GE remote code doesn’t work?
If the first code doesn’t work, try the other codes listed in the table first.
However, if the problem persists, replace the remote control batteries.
If there is a physical barrier between the remote control and the device you want to control, try to remove it.
Now use more buttons and functions. You’ll also have to push for more features as the GE Universal Remote doesn’t work with all functions.
It was about programming the GE Universal Remote to eliminate the confusion of using multiple remotes. Since it is so simple, anyone can do it easily. Well, it’s your turn to try it.
