A soothing and restorative experience for the people who own hot tubs is a wonderful perk of having one in their backyards. Hot tubs are a wonderful addition to any backyard. However, just like any other piece of the home appliance, hot tubs need to be maintained and cleaned regularly to ensure that they continue to function at their highest level of efficiency while also remaining sanitary. The following are some suggestions for proprietors of hot tubs regarding the maintenance and cleaning of their respective hot tubs.
Test And Balance The Water Chemistry
The frequent testing and balancing of the water’s chemistry are one of the most crucial parts of hot tub maintenance. The pH level, total alkalinity, and sanitizer levels should be checked at least once a week using a water testing kit. If the water chemistry is not balanced, it can cause skin and eye irritation, damage to the hot tub’s components, and can reduce the effectiveness of the sanitizer. The ideal pH level for a hot tub is between 7.2 and 7.8, while the total alkalinity should be between 80 and 120 ppm.
Check The Jets
The hot tub jets play a crucial role in providing a relaxing and therapeutic experience for the users. They should be checked regularly to ensure they are working properly and are not clogged with debris. Use a small brush or toothbrush to clean the jets and remove any debris that may have accumulated. If the jets are not working properly, then you can buy the new one from Lusospas and get it installed by a professional.
Clean The Filter
To maintain the water clear and debris-free, the hot tub filter is essential. Once per month, or as the maker specifies, the filter should be cleaned. Remove the filter cartridge and rinse it with garden water to get rid of any dirt or debris before turning off the hot tub’s electricity. If the filter is very dirty, you can soak it in a filter cleaner solution overnight and rinse it thoroughly the next day.
Drain And Refill The Hot Tub
Every three to four months, or as the maker may advise, hot tub water should be drained and replaced. This helps to remove any built-up contaminants and minerals in the water that cannot be removed through regular maintenance. Before draining the hot tub, turn off the power and allow the water to cool down to avoid any burns or scalds. Once the water has been drained, use a hot tub cleaner and a soft sponge to clean the surfaces of the hot tub. Rinse thoroughly and refill the hot tub with clean water.
Maintain The Hot Tub Cover
A hot tub cover is a wise investment if you have an air source heat pump hot tub because it keeps the water at the proper temperature and shields it from detritus, which lowers energy costs. To get rid of any grime or debris, it should be cleaned frequently with water and mild detergent. Abrasives and harsh substances shouldn’t be used because they can harm the cover. Additionally, the cover should be regularly checked for any tears or other damage that might enable debris and insects to get inside the hot tub.
Keep The Surrounding Area Clean
The area around the hot tub should be kept clean and free of debris, which can enter the hot tub and cause damage to the components. Regularly sweep the area around the hot tub and remove any leaves, twigs, or dirt. If the hot tub is located near trees or bushes, trim the branches regularly to prevent them from falling into the hot tub.
Conclusion
Maintaining and cleaning a hot tub is essential to ensure its longevity and to provide a safe and hygienic experience for its users. Regular testing and balancing of the water chemistry, cleaning the filter, draining and refilling the hot tub, maintaining the hot tub cover, checking the jets, keeping the surrounding area clean, and using a hot tub cover lifter are some of the important maintenance and cleaning tips for hot tub owners. By following these tips, hot tub owners can enjoy a relaxing and therapeutic experience in their hot tubs for years to come.
